Keypads | Options 2

Offline Options

  • Allow Access to the Trouble View Menu: When enabled the keypad will allow access to the View Trouble Menu if no user is logged in.
  • Allow Access to the Event Review Menu: When enabled the keypad will allow access to the Event Review Menu if no user is logged in.
  • Allow Access to the Information Menu: When enabled the keypad will allow access to the Keypad Information menu is no user is logged in.
  • Keypad Login Requires Card: When enabled the keypad will require access card verification along with a user code before the user login can succeed.
  • Offline Access to Automation Menu * : When enabled the keypad will allow access to the Automation Menu if no user is logged in.

In addition to the offline options outlined above, it is also possible to view any open inputs in the primary area in the offline menu, using the command OfflineInputView = true. To view all inputs in the primary area, also include the command ClosedInputsInOfflineView = true.

General Options

  • Disable the LCD Keypad Beeper: When enabled the keypad will not beep when a key is pressed.
  • Duplex Inputs (4 Keypad Inputs): When enabled the keypad will enable the Duplex Input option making it possible to connect four inputs to the keypad.
  • Beep On Communication Failure: When enabled the keypad will beep on a communication failure.
  • Clear Key Can Disable Keypress Beeper: When enabled the CLEAR key can disable the keypad beeper.

  • Virtual Module * : Enable this option to register the module as a virtual module. Virtual modules act as placeholders in the system, allowing you to program virtual inputs and outputs for use with programmable functions and other advanced features.

Output Options

  • Activate Access Level Output Only on Valid Access * : When enabled the user's access level output will activate after they have logged into the keypad, only if they have a valid menu group and can remain logged in to the keypad.
  • Always Activate Access Level Output * : When enabled the user's access level output will activate after they have logged into the keypad, even if they do not have a valid menu group or the ability to control other features through the keypad.